VERTEX SD 5 |
5 Channel Digital Indicator |
Vertex
SD5 is our new 5 channel Digital Display Indicator. It is a low cost, yet reliable, Digital Panel
Indicator. You can set the scan rate between 0~10 seconds per channel or stop on one channel if required. You can also disable the channels you are not using. The SD5 comes standard with two alarms that cover all 5 inputs. RS485 comms are also available as an optional extra so
that these indicators can be networked. |
Specifications |
|
Input |
Inputs are configurable between Type J, Type K and Type T |
RTD:DIN PT-100 |
|
Ranges |
All 5 channels need to be the same input and range. See ranges listed below. |
Displays |
The top display shows the reading and the bottom indicates which channel it is for. |
Accuracy |
T/C±1°C; RTD ±0.2°C |
Sampling Time |
0.25 second |
Alarm |
The indicator comes standard with 2 configurable alarms. These alarms work across all 5 input channels and will be activated if any one channel exceeds the set value.Rated at 10A/ 240 VAC (Resistive load) |
General |
Rated Voltage:AC 90~264VAC 50 / 60Hz |
Ambient Temperature:0~50°C |
|
IP Rating: IP 65 | |
Ambient Humidity:0~90 % (Non-Condensing) |
|
Consumption:Less than 3VA |
|
Input Type and Range |
||||
Type |
Range |
|||
J |
-50℃~1000℃ |
-50.0℃~999.9℃ |
-58℉~1832℉ |
-58.0℉~999.9℉ |
K |
-50℃~1370℃ |
-50.0℃~999.9℃ |
-58℉~2498℉ |
-58.0℉~999.9℉ |
T |
-270℃~400℃ |
-199.9℃~400.0℃ |
-454℉~752℉ |
-199.9℉~752.0℉ |
DPT |
-200℃~600℃ |
-199.9℃~600.0℃ |
-328℉~1112℉ |
-199.9℉~999.9℉ |
..................................................
back
to top
Back
to Main Page
2 Year Warranty